Magnetek IMPULSE VG+ Series 3, Instruction Manual

Page: 85 / 183

IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
5-32
Optional Digital Input Set-up (G5IN4 Digital Multi-Function Inputs)
The optional G5IN4 board accepts four additional multi-function inputs. The G5IN4 board has four
terminals, each of which can be programmed to one of the fourteen sets of inputs. Each input in the
set can be enabled or disabled.
1. Set C9-01 to 1.
2. Determine the parameter C9-02 setting
by specifying the first digit (from left)
and the fourth digit (from left) using
tables 5-3 and 5-4. The second and
third digit should always be “0”.
3. Set parameter C9-02.
Parameter
Code
Display Function Range Initial Value
Access
Level
C9-01 G5IN4 0/1 Determines whether the
G5IN4 Digital Multi-Function
Inputs are enabled. 0 Adv
0 Disabled
1 Enabled
C9-02 G5IN4 Setup Determines the four settings
for G5IN4 Digital Multi-
Function Inputs. 0000–FFFF 0 Adv
Table 5-2:
1 = 120V is present on terminal
0 = No voltage is present on terminal
MONITOR TERMINAL
U1-25 1 2 3 4
1 1 0 0 0
2 0 1 0 0
3 1 1 0 0
4 0 0 1 0
5 1 0 1 0
6 0 1 1 0
7 1 1 1 0
8 0 0 0 1
9 1 0 0 1
A 0 1 0 1
B 1 1 0 1
C 0 0 1 1
D 1 0 1 1
E 0 1 1 1
F 1 1 1 1
X 0 0 X
4th Digit
3rd Digit
2nd Digit
1st Digit
C9-02 =