Magnetek IMPULSE VG+ Series 3, Instruction Manual

Page: 174 / 183

IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
A-5
C5-08 Current/Torque Reference for Look Speed 2 160 5-24
C5-09 Look Speed 3 60 5-24
C5-10 Current/Torque Reference for Look Speed 3 160 5-24
C5-11 Current Ref for > Look Speed 3 160 5-24
C5-12 Load Check Setting Time 0.20 5-24
C5-13 Load Check Test Time 0.10 5-24
C5-14 Load Check Fault Speed 6 5-24
C6-01 Ultra Lift Enable/Disable 0 5-26
C6-02 Ultra Lift Forward Speed 60 5-26
C6-03 Ultra Lift Reverse Speed 60 5-26
C6-04 Ultra Lift Forward Torque 50 5-26
C6-05 Ultra Lift Reverse Torque 30 5-26
C6-06 Ultra Lift Enabling Speed 60 5-26
C6-07 Ultra Lift Delay Time 2.0 5-26
C6-08 SFS Acceleration Gain 1.0 5-26
C6-09 Normal Overspeed Level 60 5-26
C7-01 Forward Torque Limit 150 5-28
C7-02 Reverse Torque Limit 150 5-28
C7-03 Forward Regen Torque Limit 180 5-28
C7-04 Reverse Regen Torque Limit 180 5-28
C7-05 Torque Limit Gain by MFI 1.25 5-28
C8-01 Torque Compensation Time 1.50/2.50 5-30
C8-02 Current Feedback OK Timer 1.50/2.50 5-30
C8-03 Minimum Brake Release Torque 10 5-30
C8-04 Roll Back/BE4 Timer 0.70 5-30
C8-05 Roll Back Count 400 5-30
C8-06 BE3/Alternate Rev Torque Time 0.50 5-30
C8-07 BE3 Detect Count 50 5-30
C8-08 Alternate Reverse Torque Limit 10 5-31
C8-09 Zero Speed Level 1 5-31
C8-10 Load Float Time 10 5-31
C8-11 Brake Delay Time/BE5 Timer 0.7 5-31
C8-12 BE6 Detect Time 5.0 5-31
C8-13 BE6 Maximum Count 250 5-31
C8-15 Load Float Extension Time by MFI 10 5-31
C8-16 Initial Brake Release Torque 100 5-31
C8-17 BE6 Up Speed 6.00 5-31
C8-19 Brake Test Torque 125 5-31
C8-20 Brake Test Speed 6 5-31
C8-21 Height Measure 250 5-31
C9-01 G5IN4 Enable/Disable 0 5-32
C9-02 G5IN4 Setup 0 5-32
C10-01 Load Weight Enable/Disable 0 5-35
C10-02 Torque Output Primary Delay 200 5-35
C10-03 Load Weight Display Hold 0 5-35
No. Parameter Name. Factory Ref Page#.