Magnetek IMPULSE VG+ Series 3, Instruction Manual

Page: 117 / 183

IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
5-64
Terminal Parameters
• H1 Digital Inputs
• H2 Digital Outputs
• H3 Analog Inputs
• H4 Analog Outputs
• H5 Serial Communication Set-up
• H6 Pulse Input
Digital Inputs
The IMPULSE•VG+ Series 3 has six multi-function contact inputs for the set-up of numerous
functions. The following table lists the function selections for the multi-function contact inputs
(terminals S3 to S8) and indicates the control modes during which each function can be enabled. An
OPEO3 error will occur if a function is programmed in more than one terminal at the same time.
.
Parameter
Code
Display Function
Ref Page
Number
H1-01* Terminal S3 Sel
(parameter)
Selects the multi-function
inputs. 0-64 0 Adv
H1-02* Terminal S4 Sel
(parameter)
Same as H1-01 0–64 1 Adv
H1-03* Terminal S5 Sel
(
parameter)
Same as H1-01 0–64 F Adv
H1-04* Terminal S6 Sel
(parameter)
Same as H1-01 0–64 F Adv
H1-05* Terminal S7 Sel
(parameter
Same as H1-01 0–64 F Adv
H1-06* Terminal S8 Sel
(parameter)
Same as H1-01 0–64 F Adv
0 Multi-Step Ref 2 Multi-Step Speed 2. 5-3
1 Multi-Step Ref 3 Multi-Step Speed 3. 5-3
2 Multi-Step Ref 4 Multi-Step Speed 4. 5-3
3 Multi-Step Ref 5 Multi-Step Speed 5. 5-3
4 Speed Hold 2 Hold function (2nd step of
Three-Step Infinitely Variable). 4-10
5 Accel Command Acceleration function (2nd step
of Two-Step Infinitely Variable
or 3rd step of Three-Step
Infinitely Variable). 4-10
6 Upper Lmt 1 N/O Upper Limit–SLOW DOWN;
Normally Open 5-20
7 Upper Lmt 2 N/O Upper Limit–STOP; Normally
Open 5-20
8 Lower Lmt 1 N/O Lower Limit–SLOW DOWN;
Normally Open 5-20
9 Lower Lmt 2 N/O Lower Limit–STOP; Normally
Open 5-20
A Upper Lmt 1 N/C Upper Limit–SLOW DOWN;
Normally Closed 5-20
B Upper Lmt 2 N/C Upper Limit–STOP; Normally
Closed 5-20
Acess
Level
Initial
Value
Range