Magnetek IMPULSE VG+ Series 3, Instruction Manual, Page: 177 / 183

IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
A-8
E4-02 Motor 2 Slip --- 5-56
E4-03 Motor 2 NLA --- 5-56
E4-04 Motor 2 Poles --- 5-56
E4-05 Motor 2 Term Resistance --- 5-56
E4-06 Motor 2 Leak Inductance --- 5-56
E4-07 Motor 2 Rated Power --- 5-56
F1-01 PG Pulses/Revolution 1024 5-57
F1-02 PG Feedback Loss Select 1 5-57
F1-03 PG OverSpeed Select 1 5-57
F1-04 Action @ PG Deviation Select 1 5-57
F1-05 PG Rotation Select 0 5-57
F1-06 PG Output Ratio 1 5-57
F1-08 PG OverSpeed Level 115 5-58
F1-09 PG OverSpeed Time 0.0 5-58
F1-10 PG Deviate Level 10 5-58
F1-11 PG Deviate Time 0.3 5-58
F1-12 PG# Gear Teeth 1 0 5-58
F1-13 PG# Gear Teeth 2 0 5-58
F1-15 PGO Detect Time 0.50 5-58
F1-16 Pulse PPR Channel 2 1024 5-58
F1-17 PG Channel 2 Rotation 0 5-58
F1-18 PGO Ch 2 Detect Time 0.5 5-58
F1-19 PG-Z2 Output Select 2 5-58
F1-20 PGO Ch1 enable/disable 1 5-58
F1-21 PGO Ch2 enable/disable 0 5-58
F1-22 PG-Z2 Input Select 0 5-58
F2-01 AI-14 Input Select 0 5-59
F3-01 Digital Input Setup 0 5-59
F4-01 Analog Out Channel 1 Select 2 5-60
F4-02 Analog Out Channel 1 Gain 1.00 5-60
F4-03 Analog Out Channel 2 Select 3 5-60
F4-04 Analog Out Channel 2 Gain 50 5-60
F4-05 Analog Out Channel 1 bias 0.0 5-60
F4-06 Analog Out Channel 2 bias 0.0 5-60
F4-07 Channel 1 output signal 0 5-60
F4-08 Channel 2 output signal 0 5.61
F5-01 Digital Out Channel 1 Select 0 5-61
F5-02 Digital Out Channel 2 Select 1 5-61
F5-03 Digital Out Channel 3 Select F 5-61
F5-04 Digital Out Channel 4 Select F 5-61
F5-05 Digital Out Channel 5 Select F 5-61
F5-06 Digital Out Channel 6 Select F 5-61
F5-07 Digital Out Channel 7 Select F 5-61
F5-08 Digital Out Channel 8 Select F 5-61
F5-09 Do Output Mode 0 5-61
No. Parameter Name. Factory Ref Page#.