IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
5-40
Delay Timers
This function is used in trolley or bridge applications. It can reduce the mechanical brake wear when the operator
tries to position a load. This function is available only in traverse mode and the constant B3-03 must be set to 4
(Ramp With Timer).
Figure 5-22: Brake Delay Timers
NOTE:
The Jog control input is a multi-function input. It is enabled by programming data 15 or 16 in H1-
01~06.
Timer Function
•
The timer function is enabled when the timer function input (setting: 43) and the timer function output
(setting: 12) are set for the multi-function input and multi-function output respectively.
•
These inputs and output serve as general purpose I/O. Chattering of sensors, switches, contactors, etc., can
be prevented by setting a delay time.
•
When the timer function input
ON
time is longer than the value set for
C12-03
(Timer function ON-Delay
Time), the timer function output turns
ON
.
•
When the timer function input
OFF
time is longer than the value set for
C12-04
(Timer function OFF-Delay
Time), the timer function output turns
OFF
.
Parameter
Code
Display
Function
Range
Initial Value
Access
Level
C12-01
Brake Jog Delay
Brake set delay time at Jog
Control input.
0.0–100.0 sec
0.0 sec
Adv
C12-02
Brake Run Delay
Brake set delay time at RUN
input.
0.0–100.0 sec
0.0 sec
Adv
Frequency
Output
Brake
Command
Jog
Command
C12-01
C12-01
Parameter
Code
Display
Setting Range
Factory Default
Setting
Access Level
C12-03
Delay-on timer
0.0~3000.0
0.0
Adv.
C12-04
Delay-off timer
0.0~3000.0
0.0
Adv.
Summary of Contents for IMPULSE VG+ Series 3
