Magnetek IMPULSE VG+ Series 3, Instruction Manual, Page: 128 / 183

IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
5-75
Analog Outputs
The IMPULSE•VG+ Series 3 has two analog outputs for the external monitoring of drive conditions.
Parameter
Code
Display Function Range
Initial
Value Access
Level
H4-01 Terminal FM Sel Assigns one of the following
function analog output
parameters to Terminal FM 1-50 2 Adv
1 Frequency Ref
2 Output Freq
3 Output Current
5 Motor Speed
6 Output Voltage
7 DC Bus Voltage
8 Output kWatts
9 Torque Reference
15 Term A1 Level
16 Term A2 Level
17 Term A3 Level
18 Mot SEC Current
19 Mot EXC Current
20 SFS Output
21 ASR Input
22 ASR Output
23 PG-Z2 Ch2
24 PID Feedback
26 Voltage Ref (Vq)
27 Voltage Ref (Vd)
29 Load Weight
30 SS Delta Speed
31 Not used
32 ACR (q) Output
33 ACR (d) Output
36 PID Input
37 PID Output
38 PID Setpoint
41 Cooling Fin
Temperature
44 ASR OUT w/o filter
50 Hook Height
H4-02 Terminal FM Gain Gain multiplier for Terminal FM
analog output signal 0.00–1000.0% 100.0 Adv
H4-03 Terminal FM Bias Bias multiplier for Terminal FM
analog output signal -110.0–110.0% 0.0 Adv
H4-04 Terminal AM Sel Assigns one of the above
function analog output
parameters to Terminal AM (See H4-01) 3 Adv
H4-05 Terminal AM Gain Gain multiplier for Terminal AM
analog output signal 0.00–1000.0% 50.0 Adv