manualshive.com logo in svg

MACROMEDIA FREEHAND MX 11, Use Manual

Share
Download
MACROMEDIA FREEHAND MX 11 Use Manual Download Page 294

Chapter 9

294

Removing layers

You can remove layers you no longer need using the Layers panel.

To remove a layer:

1

Select the layer to be removed.

2

Do one of the following:

•

Click the Layers panel Options menu control and select Remove.

•

In Windows, right-click the layer to be removed and select Remove.

A warning appears if the layer is not empty.

3

Click Yes to remove the layer and its contents.

Viewing layers and layered artwork

You can hide a layer to hide its objects without removing them. Displaying a layer displays all 
objects on that layer. If the active layer is hidden, newly created objects are not visible until the 
layer is displayed again.

To show or hide a layer, do one of the following:

•

In the Layers panel, click the left column to show or hide the layer; a check mark indicates that 
the layer is visible.

•

To show or hide a range of contiguous layers, drag up or down in the left column of the Layers 
panel. Visible layers are indicated by a check mark.

•

To show or hide all layers, Control-click (Windows) or Option-click (Macintosh) in the left 
column of the Layers panel.

Note: 

To print all foreground layers when some or all layers are hidden, select File > Document Settings > Output 

Options, and select Include Invisible Layers.

Viewing layers in Preview or Keyline mode

You can view layers as they will appear when printed in Preview mode, or as outlines in Keyline 
mode. A filled circle to the left of the layer name in the Layers panel indicates Preview mode; a 
hollow circle indicates Keyline mode. Modes affect onscreen display only; they have no effect on 
printing and exporting.

To switch between Preview and Keyline modes, do one of the following:

•

In the Layers panel, click the circle icon to the left of the layer name. The Preview mode icon is 
a solid circle; the Keyline mode icon is a hollow circle.

•

To switch between Preview and Keyline modes for a contiguous selection of layers, drag 
through the circle icon column for those layers.

•

To switch the view of all layers, Control-click (Windows) or Option-click (Macintosh) the 
circle icon to the left of any layer name.

Summary of Contents for FREEHAND MX 11





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands