177
Learning Advanced Features
Group Code Name
LCD Displays
Parameter Setting
Setting
Range
Unit
14
PID wakeup 2 value
PID
WakeUp2Dev
20.00
0
–Unit Band Unit
20
Soft Fill options
Soft Fill Sel
0
No
0
–1
-
PID Operation Sleep Mode Setting Details
Code
Description
AP1-05 Sleep Bst Set
Sets the sleep boost volume. Feedback must reach the boost
level (PID ReSleep Bst Set) for the inverter to enter
the Sleep Mode.
AP1-06 Sleep Bst Freq
Sets the inverter operation frequency to reach sleep boost
level.
AP1-07 PID Sleep1 DT
AP1-11 PID Sleep2 DT
AP1-08 PID
Sleep1Freq
AP1-12 PID
Sleep2Freq
If the operating frequency stays below the frequencies set at
AP1-08 and AP1-12 for the set times at AP1-07 and AP1-11,
the inverter accelerates to the PID sleep boost frequency (PID
Sleep Bst Freq). Then, when the feedback reaches the value
set at the boost level, the inverter enters standby mode.
AP1-09 PID WakeUp1
DT
AP1-13 PID WakeUp2
DT
AP1-10 PID
WakeUp1Dev
AP1-14 PID
WakeUp2Dev
Sets the reference for PID operation in PID sleep mode. PID
operation resumes when PID feedback variation (from the PID
reference) exceeds the values set at AP1-10 and AP1-14, and
maintains the condition for times set at AP1-09 or AP1-13.
IN-65
–71
P1
–7 Define
When the PID Sleep Wake 2 terminal is set and input, PID
operation sleep mode is operated based on the parameter
settings at AP1-11
–14.
Summary of Contents for H100
