LSIS H100, Operation Manual

Page: 127 / 610

113
Learning Basic Features
4.10.3 Multi-step Acc/Dec Time Configuration
Acc/Dec times can be configured via a multi-function terminal by setting the ACC
(acceleration time) and DEC (deceleration time) codes in the DRV group.
Group
Cod
e
Name LCD Display Parameter Setting Setting Range Unit
DRV
03 Acceleration time Acc Time 20.0 0.0
–600.0
sec
04 Deceleration time Dec Time 30.0 0.0
–600.0
sec
BAS
70
–
83
Multi-step
acceleration/Decele
ration time1
–7
Acc Time 1
–7 x.xx
0.0
–600.0
sec
Dec Time 1
–7 x.xx
0.0
–600.0
sec
IN
65
–
71
Px terminal
configuration Px Define
(Px: P1
–P7)
11 XCEL-L
0
–55
- 12 XCEL-M
13 XCEL-H
89
Multi-step
command delay
time
In Check
Time
1 1
–5000
ms
Acc/Dec Time Setup via Multi-function Terminals
– Setting Details
Code Description
BAS-70
–82
Acc Time 1
–7
Set multi-step acceleration time1
–7.
BAS-71
–83
Dec Time 1
–7
Set multi-step deceleration time1
–7.
IN-65
–71
Px Define (P1
–
P7)
Choose and configure the terminals to use for multi-step Acc/Dec time
inputs
Configuration Description
11 XCEL-L Acc/Dec command-L
12 XCEL-M Acc/Dec command-M
13 XCEL-H Acc/Dec command-H
Acc/Dec commands are recognized as binary code inputs and will control
the acceleration and deceleration based on parameter values set with
BAS-70
–82 and BAS-71–83.
If, for example, the P6 and P7 terminals are set as XCEL-L and XCEL-M
respectively, the following operation will be available.