LSIS H100, Operation Manual

Page: 266 / 610

Learning Advanced Features
252
Code Description
CNF-50 View Lock
Set
To enable parameter view lock, enter a registered password. The
[Locked] sign will be displayed on the screen to indicate that parameter
view lock is enabled. To disable parameter view lock, re-enter the
password. The [locked] sign will disappear.
5.37 Parameter Lock
Use parameter lock to prevent unauthorized modification of parameter settings. To enable
parameter lock, register and enter a user password first.
Group Code Name LCD Display
Parameter
Setting Setting
Range
Unit
CNF
52 Parameter lock Key Lock Set Un-locked 0
–9999
-
53 Parameter lock password Key Lock Pw Password 0
–9999
-
Parameter Lock Setting Details
Code Description
CNF-53 Key Lock
PW
Register a password to prohibit parameter modifications. Follow the
procedures below to register a password.
No Procedures
1 Press the [PROG/ENT] key on CNF-53 code and the saved
password input window will be displayed. If password registration
is being made for the first time, enter ‗0‘. It is the factory default.
2 If a saved password has been set, enter the saved password.
3 If the entered password matches the saved password, then a
new window to enter a new password will be displayed. (The
process will not move to next stage until the user enters a valid
password).
4 Register a new password.
5 After registration, Code CNF-53 will be displayed.