LSIS H100, Operation Manual

Page: 327 / 610

313
Learning Advanced Features
Operation State Monitor Setting Details
Code Description
CNF-20 AnyTime
Para
Select items to display on the top-right side of the keypad screen.
Choose the parameter settings based on the information to be
displayed. Codes CNF-20
–23 share the same setting options as listed
below.
Setting Function
0 Frequency On stop, displays the set frequency. During
operation, displays the actual output
frequency (Hz).
1 Speed On stop, displays the set speed (rpm). During
operation, displays the actual operating speed
(rpm).
2 Output
Current Displays output current.
3 Output
Voltage Displays output voltage.
4 Output Power Displays output power.
5 WHour
Counter Displays inverter power consumption.
6 DCLink
Voltage Displays DC link voltage within the inverter.
7 DI Status Displays input terminal status of the terminal
block. Starting from the right, displays P1
–P8.
8 DO Status Displays output terminal status of the terminal
block. Starting from the right: Relay1, Relay2,
and Q1.
9 V1 Monitor[V] Displays the input voltage value at terminal V1
(V).
10 V1 Monitor[%] Displays input voltage terminal V1 value as a
percentage. If -10 V, 0 V, +10 V is measured,
-100%, 0%, 100% will be displayed.
13 V2 Monitor[V] Displays input voltage terminal V2 value (V).
14 V2 Monitor[%] Displays input voltage terminal V2 value as a
percentage.
15 I2 Monitor[mA] Displays input current terminal I2 value (A).
16 I2 Monitor[%] Displays input current terminal I2 value as a
percentage.