4 - 22
Down speed control knob
Slow & Lock
Fast
When using hitch/drawbar, or driving on the road,
lift up the 3-point linkage and fix it by turning the
down speed control knob to the locking position.
When driving the tractor without attached implement, comply with the followings.
1. Connect upper link(5) to the fixing hook installed in front of the upper link.
2. Connect stabilizer(2) to the lower link(3) to avoid the lateral movement of the lower link.
If the 3-point linkage is not necessary, remove it as follow.
1. Remove upper link pin(7) and upper link(5).
2. Detach the rear side of the stabilizer(2) from the lower link(3).
3. Detach the lower side of lift-rod(LH)/(RH) while holding lower link(3) tightly not to fall down.
4. Remove lift rod (LH), lift rod (RH) and stabilizer(2) step by step.
5. Remove lower link(3) carefully not to get hurt due to its own weight.
▶
The parts of 3-point linkage are
very heavy. When handling
them, take care not to get injury.
PLEASE BE CAREFULL !
Caution
⑤
Handling of the 3-point linkage
1. Lift rod (RH)
2. Stabilizer
3. Lower link
4. Lift rod (LH)
5. Upper link
6. Lift rod pin
①
②
③
④
⑤
⑥
⑦
Summary of Contents for XP8084
