LS tractor XP8084, Operator'S Manual

Page: 220 / 288

5 - 32
▶
The filters are made of specially treated media with a rubber sealing strip bonded
around the sides. Take care not to damage the element during installation.
Notice
(7) Hydraulic hoses and Leakage

Stop the engine and place all the transmission
gears in neutral and lower down the implement
to the ground.

Periodically check the hydraulic system for leaks
or damaged parts - kinked, crushed, flattened,
hard blistered, heat cracked, charred, twisted,
soft or loose covered hoses and fittings.

Before removing hydraulic components, make
sure to check that the hydraulic pressure is
relieved completely. The leaks of pressurized oil
can cause a fatal physical injury.
For further information, see chapter 3-5,
“Hydraulic system” in this manual.
(6) Air cleaner (Dry type)

Refer to the chapter 5-6-(6) in this manual. (See page 5-25 )
(5) Battery check

Refer to the chapter 5-13-(5), “Batter handling and Notices” in this manual. (See page 5-56 )
(8) Cleaning Cabin air filters

Before servicing the filters, switch off the blower
and close all the cabin doors and windows.

Unscrew the knobs under the roof and remove
the cover and filter element as shown in the right
figure.

Clean the elements by blowing with compressed
air not exceeding 30psi (2bar). Blow the dust
from the upper surface through the element to
the underside. Hold the nozzle at least 12 in.
(300mm) from the element to prevent damage to
the filter media.

Clean all filter chambers with a damp, lint-free
cloth. Re-install the filter elements.

Re-install the filter cover and tighten the knobs.
Cabin
air filter
Filter
cover
Knobs