LS tractor XP8084, Operator'S Manual

Page: 222 / 288

5 - 34
(4) Checking Brake oil

Open the bonnet and check the brake oil level. If
the oil level is between “MAX” and “MIN” marks,
it means “Proper amount”. If necessary, add new
brake oil.

Make sure to check the specification, before
adding new oil.
For oil specification, see chapter 5-3, “Lubricants
and Capacity” or the last page in this manual.

If the oil is discolored or contaminants are mixed,
replace the oil with new one.

After changing oil, bleed the air from the brake
and clutch line. If possible, contact your
authorized local dealer.
( For further information, see page 5-51.)
Brake oil tank
▶
If any part of clutch or brake line is replaced or the oil is changed, execute air-
bleeding. Air in the brake and clutch line can cause serious faults of the brake and
clutch operation and fatal physical injury.
▶
If the specific oil is not used, even though a little amount, it can cause serious
faults of the clutch and brake devices. In this case, all of brake and clutch device
must be serviced. Contact your authorized local dealer.
▶
If the engine is very hot, it may cause serious burns. After the engine is cooled
down sufficiently, check the brake oil level.
Warning
Power shift
oil filter
(3) Replacing Power shift oil filter
(power shift models only)

This filter is attached under the right-hand step
floor of the power shift models.

Replace this filter with a new one to the same as
procedure of the hydraulic oil filter.