manualshive.com logo in svg

LS tractor XP8084, Operator'S Manual

The LS tractor XP8084 Operator's Manual is an essential guide for owners, providing detailed instructions and valuable insights into operating this high-performance tractor model. This comprehensive manual can be easily downloaded for free from our website, ensuring you have quick and convenient access to all the information you need.

Share
Download
background image

7 - 7

Coupler (control)

▶

After connecting trailer brake, the brake pedals have to be locked together to 

ensure correct operation of trailer brakes, balanced operation of the tractor brakes.

▶

While operating the tractor / trailer combination, check the air pressure gauge and 

trailer brake pressure warning indicator periodically, and if the indicator is turned on, 

stop the tractor immediately and check the leakage or faults.

▶

The type of trailer brake has to be matched correctly with the tractor brake system. 

Contact your authorized dealer for the details.

▶

Apply the brake pedals several times, ensuring that the air pressure, as indicated 

by the gauge, drops as the brakes are applied and rises again when they are 

released. Never drive the tractor with the trailer brake pressure warning indicator 

turned on.

Caution

(3) How to use pneumatic trailer brake system

Coupler (supply)

Coupler (single)

Trailer brake pressure 

warning indicator

28

If the trailer brake air pressure is lower than the 

designate level, the trailer brake pressure 

warning indicator shall be turned on with red 

vehicle control error warning indicator (28).

When starting the engine with a trailer 

connected into the tractor air brake system, 

chock the wheels and release the parking brake 

and brake pedals. Wait until the air pressure 

builds up to the designated level. The trailer 

brake pressure warning indicator may be turned 

on until air pressure builds up to the designated 

level.

Once required pressure has been reached a 

loud “pop” will be heard, signifying that the 

unload valve has opened to allow excess 

pressure to escape to atmosphere.

Before connecting trailer brake line to the tractor, 

stop the engine and apply the parking brake.

Depending on the trailer brake type, you have to 

choose the different quick coupler(s). Check the 

trailer manufacturers’ instruction manual before 

making connections to the tractor air brake 

system. The colored quick coupler(s) shall help 

your choice. See next page.

Clean the trailer and tractor quick couplers 

before connecting the hose(s). Ensure that 

connections are secure. Check the trailer brakes 

regularly to ensure that they are functioning 

correctly.

Summary of Contents for XP8084

































































































































































































































































































Reviews:

No comments

Related manuals for XP8084

PRONAR ZEFIR 85 Servicing Instruction preview
ZEFIR 85
Brand: PRONAR Pages: 88
Valtra T series Versu Operator'S Manual preview
T series Versu
Brand: Valtra Pages: 450
Mahindra '15' Series 2015 4WD Operator'S Manual preview
'15' Series 2015 4WD
Brand: Mahindra Pages: 132
Glasdon Beacon Operating & Maintenance Manual preview
Beacon
Brand: Glasdon Pages: 13
GE GCG1700II Installation Manualdisposers & Compactors preview
GCG1700II
Brand: GE Pages: 12
Afron HD1100N Parts Manual preview
HD1100N
Brand: Afron Pages: 39
Worksaver 614HC Owner'S/Operator'S Manual preview
614HC
Brand: Worksaver Pages: 31
Terramite T5D Operator'S Handbook, Maintenance, Service & Parts Manual preview
T5D
Brand: Terramite Pages: 128
Kongskilde MS 3975 Instruction Manual preview
MS 3975
Brand: Kongskilde Pages: 40
Case IH Luxxum Quick Instruction preview
Luxxum
Brand: Case IH Pages: 24
Case HI STEIGER Series Service Bulletin preview
STEIGER Series
Brand: Case HI Pages: 6
Case IH FARMALL 55C Service Manual preview
FARMALL 55C
Brand: Case IH Pages: 41
Case IH 91 Series Installation Manual preview
91 Series
Brand: Case IH Pages: 35
Case IH Magnum 235 Service Manual preview
Magnum 235
Brand: Case IH Pages: 51
Case IH FARMALL 40B CVT Service Manual preview
FARMALL 40B CVT
Brand: Case IH Pages: 51
Case IH FARMALL 100N Service Manual preview
FARMALL 100N
Brand: Case IH Pages: 51
Case IH Magnum 250 Service Manual preview
Magnum 250
Brand: Case IH Pages: 81
Case IH Magnum 180 Service Manual preview
Magnum 180
Brand: Case IH Pages: 81

Brands by name

Popular brands

Load more brands