LS tractor XP8084, Operator'S Manual

Page: 75 / 288

3 - 5
15 LCD display panel
ⓑ
Battery voltage
 Current available battery voltage is displayed.
Battery voltage Hour meter
15
ESC Code
Speedometer
ⓐ
Hour meter and error diagnostic code
 If an error does not exist on the vehicle control,
in normal operating conditions, operating hours
will be displayed in hour meter.
 It records the hours that your tractor has been
operated regardless of the engine RPM. Use the
hour meter as a guide to determine hourly
service and maintenance intervals.
 The number, 0019.1 in hour meter means the
tractor has been operated for 19.1 hours so far.
(19 hours and 6 minutes)
 If an error(s) is occurred on the vehicle control,
the related error diagnostic codes are displayed
sequentially.
DEF/urea level EHL display(optional)
Error Diagnostic Code
Trailer brake pressure
warning indicator
FMI Code
 The RPM stored on ECU for Engine Speed
Cruise control(ESC) is displayed in normal
status.
 If any errors related to the vehicle control are
happened, FMI code to be able to know the
error type or pattern will be displayed by turns
additionally with error diagnosis code.
ⓓ
EHL mode display (optional)

For only Electro-Hydraulic Lift (EHL) models,
this display shows the current lifting position per
maximum upper limit in percent ratio.
ⓔ
DEF/urea level display
 This display shows the DEF/urea level in
percent ratio.
 It is a catalyst for engine after-treatment process.
ⓕ
Trailer brake pressure warning indicator
 If the trailer brake air pressure is lower than the
designate level, this display will be turned on
with the red vehicle control error warning
indicator (28).
28
ⓒ
Engine Speed Cruise control(ESC) and FMI code