Delay
The Delay effect can be used to create "echoes" and other related effects. It
features controls for “Time”, “Feedback”, “Filter”, “Mod Rate”, “Mod Depth”
as well as 2 “S” (“Sync”) controls.
The Time slider is used for setting the delay time (in milliseconds). This can
range from 1 ms to 680 ms.
The upper Sync popup menu can be used to sync the delay time with the
current tempo (see Appendix A for the range of possible sync settings).
The Feedback slider allows you to set the number of times the signal
repeats or "echoes".
Also included in the Delay section is a variable low pass/high pass 6dB/Oct
filter which is adjusted with the Filter slider. Negative values means a low
pass filter is applied, while positive values mean a high pass filter is applied.
The higher the absolute value of the Filter slider, the more the filter will
modify the delayed signal.
The Mod Rate sets the rate (in Hz) at which modulation takes place. As an
example, when you set the Mod Rate to 0.5Hz you get a complete sweep
from 50ms (using the example below) to 150ms and back to 50ms in 2
seconds.
The lower Sync popup menu can be used to sync the modulation rate with
the current tempo (see Appendix A for the range of possible sync settings).
C r o n o X 3
User Guide
42
