Effects 1/2
The Effects 1/2 (“FX 1/2”) section is located on the upper right of the
instrument’s Main panel. The Effects 1/2 section contains the most
important controls for the first two effects processors.
The Effect Type display shows the currently loaded effects processor and
also enables you to change the current effect. To change the current effect
click on the effect type and then select another effect from the pop-up list
that appears. For more information about the available effects processors
please see the Effects Panel section of this manual.
The Send circular slider is used to set the amount of signal sent to the input
of the respective effects unit.
Inside the Send controls is the Power button which is used to set the status
of the Effects processor. This can be either On or Off. When the Effects
processor is On, the button is green.
Clicking on the Edit button opens the Panel for the respective Effects
processor. This enables quick access to the Effect processor’s various
parameters for more detailed editing.
C r o n o X 3
User Guide
16
