Controls
Most controls are changed by clicking and moving the mouse either
upwards to increase the parameter’s value, or downwards to decrease it.
Please note that even horizontal controls (like those used in the Effects
section) are operated vertically.
Holding down the ALT key while clicking on a control changes the selected
control's value a minimum step upwards (when clicking in the upper half of
the control) or a minimum step downwards (when clicking in the lower half
of the control).
Holding down the CTRL key while clicking on a control sets the control to its
default value (e.g. for Volume controls it sets the control's value to -6 dB).
The CronoX 3 features an “X-Y” type control. This control allows you to vary
2 different parameters simultaneously. One parameter (X) is controlled by
the horizontal position of the intersection of the two indicator lines. The
other parameter (Y) is controlled by the vertical position of the intersection
of the two indicator lines.
The CronoX 3 also includes a Circular Slider type control. This control
operates in the same way as a conventional slider, however it moves along
an arc of a circle.
All Controls can be controlled using external MIDI messages. To do this you
need to use the CronoX 3's Easy Controller Setup (ECS) which is described
in detail later in this manual.
C r o n o X 3
User Guide
12
