Modulation Matrix
The CronoX 3's Modulation Matrix allows you to create 10 user-defined
modulation routings. 56 modulation destinations are available for
modulation by 30 modulation sources (see Appendix F for a listing and
description of all modulation sources and destinations).
Modulation sources are shown in a column on the left of the display, while
the destinations are shown on the right. The modulation amount is
displayed in the middle. To change a routing click on the source or
destination that you want to change. A menu will appear which lets you
select the new source or destination. To remove a modulation source or
destination select the "- - -" entry in the menu. Each modulation routing can
be switched on and off by double clicking on the modulation depth.
To change the modulation depth click on the amount display and move the
mouse (while keeping the mouse button pressed) upwards or downwards
(increasing or decreasing the value) until the desired amount has been
reached. A negative modulation depth inverts the waveform of the
modulation source.
The modulation of Main Pitch has a special display for modulation depth.
The example below shows a modulation depth of "0:42" (see last row of the
Modulation Matrix). This means that the main pitch is modulated to a depth
of 0 semitones and 42 cents (or 0.42 semitones) more than usual by the
LFO 1 when the Modulation wheel is turned all the way up. This is also a
good example of indirect modulation as this line refers to the modulation
depth of slot 1 (the topmost modulation slot). In this slot the main pitch is
C r o n o X 3
User Guide
66
