Effects
The CronoX 3 has 6 independent, simultaneously-available stereo effects
modules. Effects modules 1 and 2 can be set to one of 12 different effects,
while Effects modules 3 to 6 can be set to one of four different effects from
these 12 (the same effect cannot be used twice in effect modules 3 to 6).
All 6 effects modules are identical so they will only be described in this
manual once. The Effects panel can be accessed by clicking on the tab at
the top of the instrument.
Each effects module can act as many possible effects: Delay, Stereo Delay,
Ping Pong Delay, Chorus, Phaser, Filter, Reverb, Flanger, Gator, Stereo
Enhancer, Parametric EQ and Crusher. To change the effect type click on
the menu to the right of the Effect label. All effects modules can be set to
either "On" (Green) or "Thru" (Grey) using the button to the left of the effect-
type menu.
To the right of each effect module is an Effect Send slider labeled “W”
(“Wet”). This is used to set the amount of signal sent to the input of the
respective effects module. For example, the setting of the Effect Send slider
to the right of effect module 1 determines the amount of signal that is sent
C r o n o X 3
User Guide
40
