Filters
The CronoX 3 contains two independent multi-mode filters. The controls for
Filters 1 and 2 are located on the panel labeled Filters. The panel can be
accessed by clicking on the tab at the top of the instrument.
The CronoX 3’s two filters are identical so they have only been described
once in this manual.
The CronoX 3 has 2 filter modules, each of which can be set to one of two
filter types: “S” and “F”. Both are multi-mode filters, each having a different
design. A lot of care and attention has been paid to the CronoX 3's filter
design in order to make them especially "musical" and to ensure that they
use very little CPU resources.
To turn a filter module on or off, select the "On/Off" button to the right of the
Filter 1/2 label. An important point to note is that when a filter is turned off
no filtering is applied so that the audio signal passes straight through it
without being affected.
The Filter section is divided into 3 parts: Filter Type, Filter and Filter
Envelope. These are described below.
C r o n o X 3
User Guide
36
