Filter Type
The Filter Type section is located in the middle of the Filter module’s user
interface. The currently selected filter type is shown by the status of the “S”
(“Standard”) and “F” (“Free”) buttons which are located on the top-right and
bottom-right of the Filter Type section. To change the filter type click on
either the “S” or “F” button.
S Filter
The CronoX 3's “S” or “Standard” filter contains 4 filter types: LP 12 dB
(Low Pass 12 dB/Oct), LP 24 dB (Low Pass 24 dB/Oct), HP (High Pass 12
dB/Oct) and BP (Band Pass 24 dB/Oct). The filter type can be selected by
clicking on the respective filter-type button.
F Filter
The CronoX 3’s “F” or “Free” filter is unique in that it is continuously
adjustable over a 360 degree range using a circular slider. The slider has
four “guide points” (“12.00”, “3.00”, “6.00” and “9.00”). When in the “12.00”
position, the filter operates as a Band Pass filter. Moving the circular slider
90 degrees in a clockwise direction to the “3.00” position changes the filter
type to High Pass. Continuing a further 90 degrees in a clockwise direction
to the “6.00” position changes the filter type to Band Reject. Continuing a
further 90 degrees in a clockwise direction to the “9.00” position changes
the filter type to Low Pass. Finally, moving a further 90 degrees in a
clockwise direction restores the filter to its original Band Pass setting.
The CronoX 3's “F” or “Free” filter contains 2 filter types: 12 and 24 dB. The
filter type can be selected by clicking on the respective filter-type button.
Cutoff / Resonance
This section is located on the left of the Filter module’s user interface.
Controls are available for the following parameters: Sat (Saturation), Cutoff
and Resonance.
C r o n o X 3
User Guide
37
