Effects 3/4/5/6
The Effects 3/4/5/6 (“FX 3/4/5/6”) section is located on the lower middle of
the instrument’s Main panel. The Effects 3/4/5/6 section contains the most
important controls for the last four effects processors. This section contains
the following controls: Effect Type, Send, Power and Edit. These are
described below.
The Effect Type display shows the currently loaded effects processor and
also enables you to change the current effect just like for Effect 1 and 2.
The Send circular slider is used to set the amount of signal sent from the
output of the filter to the input of the respective effects unit.
At the top of each Effect is the effect’s Power button which is used to set
the status of the Effects processor to either On or Off.
Clicking on the Edit button opens the Panel for the respective Effects
processor. This enables quick access to the Effect Processor’s various
parameters for more detailed editing.
C r o n o X 3
User Guide
17
