Global
The Global module is located in the upper middle of the Settings panel. The
Global module contains several controls used to set global parameters. The
controls located here are MasterTune, Bend Range Up, Bend Range Down,
Velocity Response Curve, Scale and “Change Dir On Save”.
Master Tune is used to set the overall tuning of the CronoX 3 if no
microtuning file is loaded. Tuning can be set from 415 Hz to 466 Hz.
Bend Range Up is used to set the CronoX 3's response to pitch bend
messages in the upwards direction. Bend Range can be set from 0 to 24
semitones.
Bend Range Down is used to set the CronoX 3's response to pitch bend
messages in the downwards direction. Bend Range can be set from 0 to 24
semitones. Note that if the “link” setting is chosen, the Bend Range for
downwards bending is the same as for upwards bending.
The Velocity Curve circular slider is located on the right of the MasterTune
control. This control allows one of ten different velocity responses to be set.
These range from linear through to an extreme exponential velocity
response.
C r o n o X 3
User Guide
71
