manualshive.com logo in svg

LG THERMA V HM051MR, Installation Manual

Share
Download
LG THERMA V HM051MR Installation Manual Download Page 239

239

INSTALLER SETTING

ENGLISH

Dry Contact Mode

Dry contact function is the function that can be used only when the dry contact devices is
separately purchased and installed.

• Change setting values using [<,>(left/right)] button.

NOTE

For dry contact mode related detail functions, refer to the individual dry contact manual.

What is dry contact?

It means the contact point signal input when the hotel card key, human body detection
sensor, etc. are interfacing with the unit.

Added system functionality by using external inputs (dry contacts and wet contacts).

Value

Description

Auto (Default)

Automatically operation ON with release hard lock 

Manual

Keep operation OFF with hard lock

Summary of Contents for THERMA V HM051MR














































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands