LG ACP BACnet, Installation And User Manual

Page: 129 / 220

117
ENGLISH
Installing ACP BACnet
Setting the functions of the ACP BACnet
The following functions can be set by using the menu of the ACP BACnet:
‡
Select Peak or Demand
‡
Setting the attributes of CH6
‡ Fire Alarm function
‡
Fahrenheit/Celsius setting function
‡ Device ID setting function
‡
Vnet number setting function
‡
Foreign Device register function
Before setting the functions of the ACP BACnet
The function setting of the ACP BACnet should be changed depending on the case that only the ACP
BACnet is used or the case that the ACP BACnet is interconnected with the external devices such as
AC Manager, power distribution indicator, and Demand controller.
In general, the function of the ACP BACnet should be set and used as follows:
When only ACP BACnet is
used
When ACP BACnet interfaces
with AC Manager
Peak or demand selection
function
Set to peak function Set to demand function
Schedule function Set to use schedule function
Set to no-use of schedule
function
Power display function
Set to use if it interfaces with power distribution indicator, and set
to no-use if it does not interface..
Caution
Setting to use the power display
y
If the ACP BACnet and the power distribution indicator are not connected, the power display
function should be set to no-use.
y If it is set to use, be careful since the control speed of the ACP BACnet will be slower.