LG ACP BACnet, Installation And User Manual

Page: 195 / 220

183
ENGLISH
Functional Specifications ACP BACnet
User Mode (Status)
‡ Point number: 18
‡ Object name: UserModeStatus_XXX (XXX: Vent address)
‡
Object type: Multi-state Input
‡ Meaning : This object is used to monitor the basic operation mode in vent
‡
Property_Value property:
1: Quick
2: Saving
3: Heater
‡
Reamark : This object is for vent only, and will not apply if the property has not been in the
past.
Set Temperature (Status)
‡ 3RLQWQXPEHU
‡
Object name: SetTempStatus_XXX (XXX: AHU address)
‡ Object type: Analog Input
‡
Meaning: This object is used to monitor the set temperature of the A/C's control authority.
‡ Present_Value property:
‡
Temperature(°C)
‡ Remarks : This object is for indoor units only, and reports the room temperature data
measured by the indoor units.
Accumulator Power Distribution (Status)
‡
Point number: 20
‡ Object name: AccumPowerStatus_XXX (XXX: A/C unit address)
‡
Object type: Analog Input
‡ Meaning: This object is used to monitor the accumulator power distribution of the A/C's
control
‡
authority.
‡
Present_Value property:
‡ Power Distribution(count * 100Watt)