19
206-4334
Basic Settings Wizard (Cont.)
(Continued from previous page)
Note:
If desired, you can configure both wired and wireless connections. However, note that a
wired connection is always prioritized over a wireless connection. That is, when the TV is turned
OFF and then back ON, if a Local Area Network (LAN) is detected by the TV, the TV will default
to the wired connection. If the LAN cable is removed, the TV will then attempt to establish the
wireless connection. Whenever the TV is reconnected to the LAN, the TV will re-establish the
wired connection.
Configure a Wired Network Connection
BACK
NETWORK SETTINGS
Configure network settings.
Network Connection Type
Wired (Ethernet)
Advanced Options
Automatically Assign IP Address
IP Address
Subnet Mask
NEXT
X
^
^
^
10.1.2.4
255.255.255.0
02
a. If not already done, connect the appropriate cable between the TV and the network.
b. Make sure the
Wired (Ethernet)
option is selected in the Network Connection Type field,
and then press the Wheel (
OK
) button on the Installer Remote.
c. By default, the TV uses DHCP, and if a LAN is detected, the TV will request an IP address
from the DHCP server on the network. If the TV is able to connect to the network, the network
configuration
data will be displayed on the screen as shown in the example above.
If you need to specify static IP configuration data, continue with step (d).
d. (Optional) If required, you can edit the IP data for this TV as follows:
• De-select the “Automatically Assign IP Address” checkbox under “Advanced Options.”
•
For each data entry field: Use the arrow keys on the Installer Remote to select the field and
press the Wheel (
OK
) button. You can use the number keys on the Installer Remote to
direct enter numeric values or use the arrow keys to select the appropriate numbers from
the pop-up virtual keyboard displayed at the bottom of the screen. (Note, however, that you
must use the dot “.” key from the virtual keyboard to separate each octet of an IP address.)
When you are done, select
Enter
from the virtual keyboard, and then press the Wheel
(
OK
) button on the Installer Remote.
(Continued on next page)
