LG 42LY770M Page 73 Commercial Mode Setup Manual Download

Page: 73 / 104

206-4271

Reference: Updating TV/PTC Software using a USB Memory Device

This section describes how to update TV (CPU) and/or PTC software using the TV Manager /

USB Download Menu “Update TV Software” and/or “Update PTC Software” option(s), respectively,

though you may also use the Ez Download utility to update software, if desired. See “Ez Download

Utility” on pages 31 to 34 for further information.

Before You Begin

•

Software update files must be stored in a folder named “LG_DTV” in the root directory of the

USB memory device.

• Ensure the USB device has been formatted with FAT format.

Update the TV/PTC Software

Note:

You can check the TV/PTC software versions by accessing the Installer Menu with the

Installer Remote. See “Accessing the Installer Menu” on page 35 for further information. PTC and

CPU versions are displayed in the Installer Menu footer.

Note for TV CPU Software Update only:

If the TV detects a software file on the USB device, it

will automatically display an Update TV Software screen, and if the file contains a later version of

software than is currently running on the TV, you can start the software update from this screen

(select

UPDATE

and press

). Otherwise, you can exit the screen (select

CANCEL

and press

), and access the TV Manager / USB Download Menu as described below.

1. Turn ON the TV, and then insert the USB memory device into either of the USB ports on the TV.
2. Press

MENU

on the Installer Remote to display the TV setup menus (TV is in Pass-through

Mode) or the Function Menu (TV is not in Pass-through Mode).

3. Use the arrow navigation keys to select/highlight either the

General

menu icon from the TV

setup menus or the

Safety

menu icon from the Function Menu. Then, press the number “

”

key a total of seven times to display the TV Manager / USB Download Menu.

4. With the TV Manager / USB Download Menu on display, use the Up/Down arrow keys to select

Update TV Software

Update PTC Software

, as applicable, and press

Note:

The TV Manager / Diagnostics Menu is for service use only.

CANCEL

TV MANAGER

USB Download Menu

Diagnostics Menu

Ez Download

Logo Image Download

Update TV Software

Update PTC Software

Teach To TV (TLX)

(Continued on next page)

Summary of Contents for 42LY770M









































































































Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands

LG 42LY770M, Commercial Mode Setup Manual

Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands