12
206-4271
Note:
After it is turned ON, the TV begins an initialization process, and it may take several minutes
for the LG Setup Wizard to appear.
The LG Setup Wizard, comprising EZ-Manager Wizard and Express Script configuration options,
will appear on the screen each time the TV is turned ON, until one of its configuration methods
has been completed or the wizard is exited. Use the Installer Remote to make selections and
complete each step.
• The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated
or manual) of configuring the essential Installer Menu items for Pro:Centric operation. However,
while intended primarily for Pro:Centric-related configuration, the EZ-Manager Wizard also offers
Zoning options. LY770M TVs support the TV Zoning and Wi-Fi Zoning features, both of which
enable location-specific settings (see Reference section, “Using the TV’s Zoning Features,” for
further information). The EZ-Manager Wizard enables you to set the TV Zone # and/or the Wi-Fi
Zone # in the TV as part of the configuration process.
• The EZ-Manager Wizard also enables you to access USB download options as part of the
configuration process
, if desired, to perform USB
configuration and/or update functions.
• The Express Script guides you through the process of setting up the essential items for most
hospital TV viewing applications and also enables you to configure the Pro:Centric settings on
the TV. Note that the Express Script uses the TV’s standard RF Auto Tuning feature to create the
TV’s channel lineup; IP channels are not supported.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the configuration process, as doing so will interrupt
the current step and may corrupt the configuration data.
Note: If you do not intend to complete the Express Script, but you wish to enable
pillow speaker functionality, you must set Installer Menu item 027 HOSPITAL MODE
appropriately. See the “Installer Menu” section of this document for further information.
Before You Begin
• If you plan to create a customized Master TV Setup using the procedure described on pages
46 to 48, be sure to exit the LG Setup Wizard in order to avoid setup conflicts or setting modes
that may cause the TV to malfunction or restrict the custom setup procedure. See also “Initiate
Configuration or Exit the LG Setup Wizard” on the following page.
• If it has been completed or exited and therefore does not display, the Setup Wizard can be
reactivated; however, this requires that you restore the TV to a factory default condition. See
Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
• If you would like to enable Media Share features (i.e., Smart Share, Screen Share, and DMR)
on the TV without using a TLX file for configuration purposes, you will need to create a custom
Master TV Setup and use the IP Environment Menu to specify the settings. Refer to “IP
Environment Setup” on pages 65 to 72 for information on the IP Environment Menu. See also
“Custom Master TV Setup” on pages 46 to 48.
LG Setup Wizard
