LG 42LY770M Page 6 Commercial Mode Setup Manual Download

Page: 6 / 104

206-4271

Commercial Mode Overview

This document describes how to set up LY770M Pro:Centric

TVs for Commercial Mode operation.

LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map

resides in the TV’s CPU, Protocol Translation Controller (PTC), or embedded

-LAN™ (EBL) module, or

it resides externally from the TV (i.e., in a device from the solution provider).
These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, the

EBL module can be configured either for Pass-through Mode (default) or FTG Mode. When neither the CPU

nor EBL is in FTG Mode, these TV models also allow external control via the TV’s MPI port.

Setup Checklist

Note:

This document provides information specific to Commercial Mode operation. Refer to the Owner’s

Manual for information on TV installation and hardware and cable connections.

Installation

__ Unpack TV and all accessories.

__ Install batteries in the Installer Remote.

__ Install TV on VESA mount or stand.

Note:

It may be advisable to make all cable

connections before installing on VESA mount

or stand, as appropriate.

Hardware Connections

__ Install any additional hardware as

appropriate to your institution, LAN, etc.

Cable Connections

__ Make all rear jack panel connections, as

appropriate.

Commercial Mode Setup

__ Complete appropriate procedures as described

in this document for Commercial Mode operation.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode via CPU operation

or create a Master TV Setup for cloning purposes. This mode also allows external control via the GAME

CONTROL/MPI port on the TV rear jack panel.
There are three methods for configuring individual TVs that are currently in Pass-through Mode: using

one of two LG Setup Wizard options or using the Custom Master TV Setup procedure as described in this

document.

LG Setup Wizard Configuration

When the TV is in a factory default state, the LG Setup Wizard

provides the following two configuration

options:
•

The EZ-Manager Wizard provides automated or manual options for configuring essential items for

Pro:Centric operation and also provides an option for using a USB memory device to configure the TV.

Use the Installer Remote to make selections and complete each step.

•

The Express Script provides limited customization of the TV features and Installer Menu items, confined

to those that are essential to most hospital TV viewing applications.

See “LG Setup Wizard” on pages 12 to 13 for further information.

Custom Master TV Setup

The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for

Pass-through Mode or FTG Mode via CPU configuration purposes. Use the Installer Remote to c

onfigure

Installer Menu items as required for TV operation and set up TV features (Channel, Picture, Sound, etc.).

See “Custom Master TV Setup” on pages 46 to 48 for detailed information.

Summary of Contents for 42LY770M









































































































Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands

LG 42LY770M, Commercial Mode Setup Manual

Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands