LG 42LY770M Page 11 Commercial Mode Setup Manual Download

Page: 11 / 104

206-4271

Pro:Centric Operation (Cont.)

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the

Pro:Centric Server Admin Client User Guide

. This document describes only those settings that must

be specified on the TVs to enable Pro:Centric remote management and/or the Pro:Centric application.

• Remote management (TV E-Z Installation): The Pro:Centric server Admin Client provides remote

management facilities for downloading splash screen image and software/firmware updates as well as

facilities for downloading a TLX file for FTG Mode via CPU configuration.

• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,

comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric

application settings are managed via the Pro:Centric server Admin Client.

The Pro:Centric server settings can be configured using one of the methods described below.

Note:

If using a Pro:Centric pillow speaker, also set Installer Menu item 027 HOSPITAL MODE to the

required value.

TV in Factory Default State

When the TV is in a factory default state, LG’s Setup Wizard (see pages 12 to 13) provides automated or

manual options for configuring the Pro:Centric server settings.

The EZ-Manager branch of the Setup

Wizard

also provides a USB configuration option that enables you to configure a TV for FTG Mode via CPU

using a TLX file stored on a USB memory device. The TLX file incorporates FTG Installer Menu settings,

including Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL, which are used to set up the

TV’s Pro:Centric feature.

Note:

If Pro:Centric data delivery will be over IP, there is a Domain Name System (DNS) server at the

site, and you intend to use the EZ-Manager Wizard to set up the TV, you can create a DNS entry

“procentric.local” for the Pro:Centric server that will enable automated Pro:Centric IP configuration via the

wizard. If there is no DNS entry for procentric.local, you will need to manually enter the Pro:Centric server

IP address and port number during configuration.

TV in Pass-through Mode

If the TV is in Pass-through Mode, either:
• Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.

See Installer Menu information on pages 35 to 45 for further details. Also, as necessary, refer to “Custom

Master TV Setup” on pages 46 to 48 and/or cloning information on pages 53 to 58.

•

Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You must

use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See “Accessing

the IP Environment Menu” on page 65 and “Pro:Centric Setup” on pages 65 to 67 for further information.

Note:

When the TV is in either Pass-through Mode or FTG Mode via CPU, you can also leave Installer

Menu item 119 DATA CHANNEL set to its default value (255) to enable the TV’s Data Channel Auto Search

feature to set the DATA CHANNEL value. See item 119 description on page 44 for additional information.

TV in FTG Mode

If the TV is in FTG Mode (via CPU or EBL), use the appropriate FTG application software to update Installer

Menu items #98 Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the

FTG Installer Menu settings to the TV in accordance with the FTG Mode of configuration. Refer to the

FTG

Mode overview on

pages 7 to 9 for further information on FTG Mode operation and configuration

. Also—for

FTG Mode via CPU only—see note above regarding the option to use the TV’s Data Channel Auto Search

feature to set the DATA CHANNEL value.

Summary of Contents for 42LY770M









































































































Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands

LG 42LY770M, Commercial Mode Setup Manual

Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands