27
206-4271
Express Script (Cont.)
(Continued from previous page)
Enabled Aux inputs are included in the channel lineup. If an Aux input will not be used, it is
typically advisable to disable it, though you may also simply delete it from the channel lineup
in step 5, if you want to leave it enabled in the Installer Menu. When you are ready to continue,
use the arrow keys to select
NEXT
, and then press
OK
.
Note:
After the TV setup is transferred to the PTC (see step 7), the only way to remove Aux
inputs from the PTC Channel Map, is to go to the Channel Preview/Banks Setup Menu and
select Normal-Deleted.
Note:
Disabled Aux inputs are not included in the channel lineup. However, if you wish to
enable a disabled Aux input in the future, you may do so by changing the applicable Installer
Menu settings (see Installer Menu information in this document).
3. In the Speaker Selection screen, use the arrow keys on the Installer Remote to select the ap-
propriate speaker configuration:
• Highlight/select the desired speaker: Pillow Only (default), TV Only, or Pillow & TV. Then,
press
OK
.
• If applicable, select the pillow speaker code/voltage and press
OK
.
Note:
If using a Pro:Centric pillow speaker (LG IR codes) or a pillow speaker with Zenith IR
codes, make sure the “Zenith” pillow speaker code (default) is selected.
When you have made your selection(s), use the arrow keys to select
NEXT
, and then press
OK
.
SPEAKER SELECTION
BACK
NEXT
Select the desired speaker configuration:
Pillow Only
TV Only
Pillow & TV
Pillow Speaker Code/Voltage
Zenith
Philips
RCA
04
EXIT
4. In the Channel Tuning screen, you have the option to initiate an automated channel scan that
will search for all available analog and digital channels. Select
RUN AUTO TUNING
and press
OK
on the Installer Remote to start the channel scan.
Note: You MUST select RUN AUTO TUNING and press OK in order to run the
channel scan. If you move on to the next step without running Auto Tuning, there
will be no analog or digital channels in the channel lineup. In this case, upon
completion of the Express Script, the only channels in the resulting PTC Channel
Map will be any enabled Aux inputs.
(Continued on next page)
