LG 42LY770M Page 35 Commercial Mode Setup Manual Download

Page: 35 / 104

206-4271

Installer Menu

Use the Installer Menu to set up, change, or view operational settings. This section describes how

to access, use, and exit the Installer Menu from the TV itself. However, you should also refer to the

Installer Menu descriptions in this document if you are configuring the TV CPU using a TLX file

created using LG’s FTG File Manager software or configuring the EBL locally (.rml) or remotely (via

FMA-LG101 / .fma) using the FTG Device Configuration Application software.

Refer to the table on pages 37 and 38 for brief descriptions of Installer Menu items. More detailed

descriptions follow the table listing.

Accessing the Installer Menu

1. Turn ON the TV.

If the LG Setup Wizard appears on the screen when you turn ON the TV, exit the wizard.

2. Using an Installer Remote, press

MENU

repeatedly until the on-screen display of the TV setup

menus (if the TV is in Pass-through Mode) or the Function Menu (if the TV is not in Pass-through

Mode) no longer toggles, and then press the Installer Menu entry sequence (e.g.,

) +

to access the Installer Menu.

Note:

The default Installer Menu entry sequence is “9876”; however, if Installer Menu item 000

INSTALLER SEQUENCE has been modified, the entry sequence may be one of three additional

options. See Installer Menu detailed descriptions for further information.

The Installer Menu opens with item 000 INSTALLER SEQ 000.

Note:

If the password (entry sequence) is not entered or registered correctly, you will see the

message “ENTER PASSWORD 0000” at the top of the screen instead of the Installer Menu

header. Once you re-enter the correct password (e.g., press 9-8-7-6 + OK), the Installer Menu will

display.

Note:

If the TV is not in Pass-through Mode, the Installer Menu is accessible as read-only. Also,

the TV Zone # will be indicated in the Installer Menu header under the configuration mode indicator

described below.

Typical Installer Menu

The Installer Menu header will vary

depending on the TV you are setting

up. In the Installer Menu footer, you

can see the current software versions

of the TV, as indicated.

PTC Version

CPU Version

xxLY770M PTC INSTALLER MENU

CPU-CTV

000 INSTALLER SEQ 000

UPN 000-000-000-000

ASIC D279

PTC V#.##.###

CPU V#.##.##.##

Summary of Contents for 42LY770M









































































































Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands

LG 42LY770M, Commercial Mode Setup Manual

Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands