LG 42LY770M Page 71 Commercial Mode Setup Manual Download

Page: 71 / 104

206-4271

IP Environment Setup (Cont.)

Media Share Setup

The Media Share Menu allows you to enable the following Media

Share features on this TV:
• LG Smart Share

®:

Allows guests to use the TV to access and view

data shared either by wired DLNA Certified

devices connected

to the same LAN as the TV or by wireless LG devices using LG’s

Smart Share application with Wi-Fi Direct

• Screen Share: Enables screen sharing with a Miracast

or Wireless

Display (WiDi) capable device (e.g., a laptop with Intel

hardware).

• DMR: Enables the TV to act as a Digital Media Renderer (DMR)

device to receive content from DLNA Certified devices on the same

network.

• Bluetooth Sound Sync: Allows guests to listen to audio from a

Bluetooth-enabled mobile device through the TV’s speakers.

Note:

See also Reference section, “Using Media Share Features,” for

additional information
1. With the Network Menu on display, use the arrow keys on the

Installer Remote to select

Media Share

. Then, press

2. In the Media Share screen, all features may be toggled from

DISABLE to ENABLE and vice versa as follows: Use the Up/Down

arrow keys on the Installer Remote to select/highlight the desired

feature, and then press

3. If desired, you can specify a name for this TV so that it is easy

to identify and differentiate from other TVs for which sharing has

been/will be enabled.
To edit the TV name (default: TV’s serial number), use the Up/

Down arrow keys to select the

TV Name

field, and then press

. You can then use the number keys on the Installer Remote to

direct enter a numeric TV name, or you can use the arrow keys to

select the appropriate alphanumeric character(s) from the pop-up

virtual keyboard at the bottom of the screen. When you are done,

select

Enter

from the virtual keyboard, and then press

on the

Installer Remote.

4. Once all fields are completed as required,

use the arrow keys on

the Installer Remote to return to the IP Environment Menu, as

necessary, or press to return to the Network Menu and/or exit

the IP Environment Menu.

Note:

While Smart Share, Screen Share, DMR, and Bluetooth Sound

Sync settings are clonable, the TV name cannot be cloned.

MEDIA SHARE

Smart Share

Screen Share

DMR

Bluetooth Sound Sync

TV Name

406KCEA6Q508

Pro:Centric

Network

Pre-loaded Apps

Notes:

Bluetooth Sound Sync is only

available with CPU v3.00.55 or later.

Also, if you enable Bluetooth Sound

Sync, a pop-up confirmation banner will

be displayed since enabling Bluetooth

Sound Sync renders Wireless LG Sound

Sync unavailable. Select

Confirm

continue.

ENABLE

DISABLE

Summary of Contents for 42LY770M









































































































Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands

LG 42LY770M, Commercial Mode Setup Manual

Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands