LG 42LY770M Page 32 Commercial Mode Setup Manual Download

Page: 32 / 104

206-4271

(Continued from previous page)

If the TV is currently in Pass-through Mode, you would like to transfer (Teach) a TLX file to the

TV via the Ez Download utility, and you intend to use one or both of the TV’s Zoning feature(s),

assign the appropriate TV Zone # and/or Wi-Fi Zone # in the TV at this time. See Reference

section, “Using the TV’s Zoning Features,” for further information.

Note: In order for the proper location-specific TV Zone and/or Wi-Fi Zone profile

data to be applied, the Zone designation(s) must be assigned in the Target TV(s)

BEFORE you continue with the Ez Download utility.

4. I

nsert the USB memory device with the appropriate file(s) into either of the TV’s USB ports.

5. To access the TV Manager / USB Download Menu from the TV menus:

• Press

MENU

on the Installer Remote to display the TV setup menus (TV is in Pass-through

Mode) or the Function Menu (TV is not in Pass-through Mode).

• Use the arrow navigation keys to select/highlight either the

General

menu icon from the TV

setup menus or the

Safety

menu icon from the Function Menu. Then, press the number “

”

key a total of seven times to display the TV Manager / USB Download Menu.

Note:

The TV Manager / Diagnostics Menu is for service use only.

6. With the TV Manager / USB Download Menu on display, use the Up/Down arrow keys to select

Ez Download

, and then press

CANCEL

TV MANAGER

USB Download Menu

Diagnostics Menu

Ez Download

Logo Image Download

Update TV Software

Update PTC Software

Teach To TV (TLX)

The Ez Download utility screen contains a listing of up to four files, one each of the Logo

(i.e., Splash Screen

) Image, TV Software (CPU), and PTC Software files stored in the LG_DTV

folder and the TLX files stored in the root directory on the USB device.

Note:

If there are no files of a particular file type on the USB device, that file type field will not

be displayed in the Ez Download screen.

For example, if there are no PTC files on the USB

device, you will not see a “PTC Software” field in the Ez Download screen.

Ez Download Utility (Cont.)

(Continued on next page)

Summary of Contents for 42LY770M









































































































Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands

LG 42LY770M, Commercial Mode Setup Manual

Search results

Summary of Contents for 42LY770M

Reviews:

Related manuals for 42LY770M

Brands by name

Popular brands