Lexmark X945E, Service Manual

Page: 831 / 847

Index
I-3
7510
Go Back
Previous
Next
842.01 scanner communication failure
2-111
842.02 scanner communication failure
2-112
842.03 scanner communication failure
2-112
842.04 scanner communication failure
2-113
842.10 scanner unit assembly - ADF communication
failure
2-113
842.11 scanner communication failure (by scanner)
2-114
842.12 scanner unit assembly communication failure
2-114
843.00 sensor (scanner HP) failure
2-115
843.01 scanner carriage over run failure
2-116
843.10 ADF RAM test failure
2-117
843.11 ADF EEPROM failure
2-117
843.12 ADF pick roll position lift up failure
2-117
843.20 scanner unit assembly connection failure
2-119
843.21 scanner unit assembly EEPROM failure
2-119
843.22 scanner unit assembly EEPROM sub system
failure
2-119
843.23 scanner cooling fan failure
2-120
843.24 image processing failure
2-121
843.25 scanner controller card assembly failure
2-121
843.26 scanner controller card assembly failure
2-122
844.00 exposure lamp error
2-122
844.01 white reference/exposure lamp illumination error
2-123
845.00 CCD error
2-124
845.01 CCD initialization (lamp on) error
2-125
845.02 CCD initialization (lamp off) error
2-126
846.00 scanner communication error
2-126
846.01 scanner communication error
2-127
846.10 sensor (ADF width APS X) error
2-127
846.12 scanner unit assembly software logic error
2-129
846.13 switch (platen interlock) open
2-129
847.00 modem error
2-130
847.01 fax storage error
2-130
848.00 Fax/modem configuration ID mismatch
2-131
849.00 hard drive/configuration ID mismatch
2-131
901.XX RIP card assembly software error
2-134
,
2-135
,
2-136
,
2-137
,
2-138
,
2-139
,
2-140
,
2-141
903.00 K developer/transport drive assembly motor
error
2-142
903.01 K PC drive motor error
2-143
903.02 CMY PC drive motor error
2-144
903.03 developer drive motor error
2-145
904.00 NVM data failure
2-151
904.00 Sensor (transfer belt HP) late error
2-146
904.01 transfer belt position failure
2-151
904.02 Sensor (transfer belt edge) failure
2-156
904.03 sensor (2nd transfer roll retract HP) late error
2-159
904.04 sensor (2nd transfer roll retract HP) lag error
2-160
904.05 sensor (CMY transfer roll retract HP) late error
2-162
904.06 sensor (CMY transfer roll retract HP) lag error
2-164
904.07 CMY transfer roll retract motor time out
2-166
905.00 NVM read/write cannot be executed failure
2-167
905.01 marking device video error
2-167
905.02 marking device Xerographics error
2-168
905.03 marking device other1 error
2-168
905.04 marking device paper handling error
2-168
905.05 marking device other2 error
2-168
907.00 printhead polygon mirror motor error
2-168
907.01 SOS internal error
2-169
907.02 SOS internal error
2-169
907.03 SOS internal error
2-170
907.04 SOS internal error
2-170
907.05 printhead control error
2-171
908.00 waste toner full error
2-171
911.00 24V LVPS cooling fan error
2-172
911.01 transfer belt drive motor cooling fan error
2-172
911.02 fuser cooling fan lock error
2-173
918.00 standard media exit shift error
2-173
920.00 fuser main lamp overheat error
2-174
920.01 front thermistor disconnection error
2-174
920.01 magenta toner RFID communication error
2-179
,
2-184
920.02 fuser sub lamp overhead error
2-175
920.03 rear thermistor disconnection error
2-175
920.04 main lamp warm up error
2-176
920.05 main lamp on-time error
2-177
920.06 sub lamp warm-up failure
2-177
920.07 sub lamp on-time error
2-178
924.00 yellow toner RFID communication error
2-178
,
2-183
924.02 cyan toner RFID communication error
2-180
,
2-184
924.03 black toner RFID communication error
2-180
,
2-184
925.00 fsensor (C ATC) error
2-182
925.00 sensor (K ATC) error
2-183
925.00 sensor (M ATC) error
2-181
925.00 sensor (Y ATC) error
2-181
940.00 MPF tray 5 size sensing error
2-185
941.00 switch (media size) size sensing error (tray 1)
2-185
941.01 sensor (media level) late error (tray 1)
2-186
942.00 switch (media size) size sensing error (tray 2)
2-187
942.01 sensor (media level) late error (tray 2)
2-188
943.00 switch (media size) size sensing error (tray 3)
2-189
943.01 sensor (media level) late error (tray 3)
2-190
944.00 switch (media size) size sensing error (tray 4)
2-191
944.01 sensor (media level) late error (tray 4)
2-192
950.00 through 950.29 EPROM mismatch failure
2-193
950.30 through 950.60 EPROM mismatch failure
2-193
951.XX RIP card assembly NVRAM failure
2-194
952.XX Interconnect card NVRAM CRC failure
2-194
953.XX operator panel assembly NVRAM failure
2-195
954.XX interconnect card assembly NVRAM failure
2-195
955.XX RIP card assembly NAND CRC failure
2-196