Lexmark X945E Service Manual Download Page 386

Page: 386 / 847

3-6

Service Manual

7510

Go Back

MOTOR TESTS

The tests in this group allow you to test specific motors, and on some motors run them forward or reverse.

To run the MOTOR TESTS:

Touch

MOTOR TESTS

from the Diagnostics Menu.

Touch the test to run.

During the test,

Motor Running...

appears on the LCD.

Note:

If available,

Forward

and

Reverse

options appear on the LCD for selected tests.

Press

Stop

to stop the test.

The following Finisher Motor Tests are available:

• Motor (entrance/paddle)

• Stacker bin lift motor

• Motor (buffer/transport)

• Booklet end guide drive motor

• Motor (exit)

• Booklet paddle drive motor

• Fin diverter solenoid

• Booklet front tamper motor

• Sub paddle solenoid

• Booklet rear tamper motor

• Media eject clutch

• Booklet folding/exit drive motor

• Media eject clamp motor

• Booklet media entrance drive motor

• Media eject motor

• Booklet transport motor

• Fin Buffer solenoid

• Booklet knife solenoid

• Punch carriage shift motor

• Booklet bin media transport motor

• Punch unit motor

• Bridge unit diverter gate solenoid

• Front tamper motor

• De-curler clutch

• Rear tamper motor

• Bridge unit transport drive motor

• Stapler carriage motor

• Booklet diverter gate solenoid

• Stapler unit motor

• Booklet stapler motor

•

• Bridge unit bin media exit solenoid

The following Printer Motor Tests are available:

• Transfer belt steering motor

• Transfer belt drive motor

• CMY PC cartridge drive motor

• C toner add motor

• K PC cartridge drive motor

• M toner add motor

• Printhead polygon mirror motor

• Y toner add motor

• Registration clutch

• K toner add motor

• Tray 1 media feed/lift motor

• CMY developer drive motor

• Tray 2 media feed/lift motor

• K developer clutch

• Tray 3 media feed/lift motor

• Fuser cooling fan

• Tray 4 feed/lift motor

• Image density sensor shutter solenoid

• 2nd transport roll retract motor

• Tray module drive motor (TTM)

• K developer transport drive motor

• TTM tray 4 media transport motor

• MPF pick solenoid

• Waste toner auger motor

• MPF transport drive motor

• Printhead shutter motor

• Duplex drive motor

• Standard exit shift motor

• Inverter clutch

• K erase lamps

• Duplex diverter gate solenoid

• CMY erase lamps

The following Scanner Motor Tests are available:

• ADF feed drv mtr

• Inverter solenoid

• Exposure lamp

• Pick roll position mtr

• ADF registration drv mtr

• Scanner drive reverse

• Scanner drv mtr

• Document set LED

Summary of Contents for X945E
















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X945E

Reviews:

Brands by name

Popular brands

Lexmark X945E, Service Manual

Search results

Summary of Contents for X945E

Reviews:

Brands by name

Popular brands