Setting the copy margins
Note:
The ADF cannot be used for this feature.
1
From the printer control panel, press
System
.
2
Press
or
repeatedly until
Default Settings
appears, and then press
OK
.
3
Press
or
repeatedly until
Copy Defaults
appears, and then press
OK
.
4
Press
or
repeatedly until
Margin Width
appears, and then press
OK
.
5
Press
or
repeatedly to select the margin you would like to change, and then press
OK
.
6
Press
or
repeatedly to adjust the margin, and then press
OK
.
7
Repeat the steps for other margins, and then press
repeatedly until
Select Function
appears.
8
Load an original document facedown on the scanner glass.
9
From the printer control panel, press
Copy
.
10
Use the keypad to enter the number of copies.
11
To change the color mode, press
Color Mode
until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
12
Press
or
repeatedly until
Margin
appears, and then press
OK
.
13
Press
or
repeatedly until
On
appears, and then press
OK
.
14
Press
Start
to begin copying.
Canceling a copy job
To cancel a print job, press
Stop
at any time.
Note:
If the copy job continues to print, part of the job may have already been transmitted to the printer buffer before
the stop command was sent.
Canceling
appears on the display, and the remaining buffered pages are printed
before the job is canceled.
Copying
69
Downloaded From ManualsPrinter.com Manuals
Summary of Contents for X560(n)
Page 2: ...Downloaded From ManualsPrinter com Manuals...
Page 108: ...6 Close the front door Clearing jams 108 Downloaded From ManualsPrinter com Manuals...
Page 112: ...6 Close the front door Clearing jams 112 Downloaded From ManualsPrinter com Manuals...
Page 115: ...5 Close the front door Clearing jams 115 Downloaded From ManualsPrinter com Manuals...
