Lexmark CS748de, Service Manual

Page: 210 / 504

3-32
Service Manual
5026
Go Back
Previous
Next
Motor Calibration
This test is run to calibrate the leading edge of the paper to each transfer station.
1. Select
Motor Calibration
from the Configuration Menu.
2.
Calibrating
displays, and the printer prints eight blank pages and then returns to the Configuration Menu.
Note:
This test should be run at 600 dpi resolution and with duplex disabled.
Paper Prompts
Controls the source the printer selects for a change paper source message. The printer displays the change
paper source message based on the size of the paper requested and not by the paper type.
Selections include Auto, Multi-Purpose Feeder, and Manual Paper.
Note:
Multi-Purpose Feeder is only available on some printer models.
Note:
If the Configure MP setting is changed to Manual, a power-on reset is performed, and the value of the
Paper Prompts menu item before the power-on reset was Multi-Purpose Feeder, then when the printer restarts,
the printer automatically changes the Paper Prompts setting to Manual Paper.
Load Manual overrides that would result in a change paper message are disabled for Paper or Envelope
prompts that are set to Manual, Manual Paper, or Manual Envelope.
Envelope Prompts
Controls the source the printer selects for a change envelope source message. The printer displays the change
envelope message based on the size of the envelope requested and not by the envelope type.
Selections include Auto, Multi-Purpose Feeder, and Manual Envelope.
Note:
Multi-Purpose Feeder is only available on some printer models.
Note:
If the Configure MP setting is changed to Manual, and a power-on reset is performed, and the value of
the Envelope Prompts menu item before the power-on reset was Multi-Purpose Feeder, then when the printer
restarts, the printer automatically changes the Envelope Prompt setting to Manual Envelope.
Load Manual overrides that would result in a change paper message are disabled for Paper or Envelope
prompts that are set to Manual, Manual Paper, or Manual Envelope.
Action for Prompts
This setting gives the user the option of having the printer resolve change prompt situations without requiring
any user assistance. If the
Prompt user
value is selected, the printer displays change prompts if the job does
not match the media in the selected source. The user must select another source or change the paper. If
Continue
or
Use current
is selected, the printer acts as if the user made the selection
Continue
or
Use current
and continues without user intervention, in most cases.
Jobs on Disk
Lets the user select whether or not the printer deletes all buffered jobs on the hard disk. This menu item only
appears if a hard disk is installed. It appears even if no buffered jobs exist on the hard disk.
Selections include
Do Not Delete
and
Delete
.
Note: Delete
does not remove Print and Hold jobs. Use
Remove Held Jobs
in the Utilities Menu (user menu)
to delete these jobs.