Lexmark C77X, Service Manual

Page: 24 / 480

1-2
Service Manual
5061
Options and features
Lexmark C77x and C78x printers support only Lexmark C77x and C78x paper-handling options. These options
are not compatible with any other Lexmark printer.
Note: The Envelope Feeder for the C772 (model 310) works only on the C772 models. The C782 (model 410)
Envelope Feeder works on the C772 and the C782 (models 310 and 410).
Options for all models
•
500-Sheet drawer—(includes 500-sheet tray and support unit) installs beneath the printer and holds
approximately 500 sheets of 20 lb, 75 g/m
2
paper. Up to three drawers are supported simultaneously, or
an option drawer and high-capacity input tray. All models.
•
500-Sheet tray—for environments with space or budget constraints this can be ordered for special media.
This temporarily replaces the standard tray in a 500-sheet drawer and holds approximately 500 sheets of
20 lb, 75 g/m
2
paper. All models.
•
Duplex option—offers two-side printing. The first option under a duplex option must be a 500-sheet drawer.
All models.
Options for C772 and C782 (310 and 410)
•
2,000-Sheet drawer (High-capacity Input Tray)—installs beneath the printer and below any other optional
input sources and holds approximately 2,000 sheets of 20 lb, 75 g/m
2
paper.
•
Output expander—installs above the printer primary output bin to offer an additional output destination.
This holds approximately 650 sheets of 20 lb, 75 g/m
2
paper. Only one output option above the printer is
supported.
•
5-Bin mailbox—installs above the printer primary output bin to offer five output destinations in one option.
Each of the five bins supports approximately 100 pages of 20 lb, 75 g/m
2
paper. Only one output option
above the printer is supported.
•
StapleSmart™ Finisher—offers stapling, and an additional output bin. The finisher supports up to 500
sheets of non-stapled. For stapled media, the output bin supports up to 15 stapled sets or about 375
sheets. The stapler staples a maximum of 25 sheets per set. Each printer supports one finisher.
•
Envelope drawer—installs beneath the printer, and holds approximately 60 envelopes (20 lb, 75 g/m
2
). Up
to three envelope drawers are supported or one envelope drawer and a high-capacity input tray. The
Envelope Drawer for the C772 works only on the models C772 (310). The C782 Envelope Drawer works
on the models C772 and C782 (310 and 410).
•
Outdoor media drawer—installs beneath the printer is specially designed for use in printing on a polyester
media used for outdoor signs. This heavy duty outdoor media is available in Letter or A4 sizes. The
Outdoor media drawer only work
•
Banner tray—extension of the Multipurpose Feeder allows printing of up to 50 sheets of 24 lb (90 (g/m²)
banner paper (up to 8.27 in. wide x 48 in. long (210mm x 1,219mm). It also serves as an extension of the
output tray, to hold the printed banner paper as it exits from the printer. The banner media tray is easily
installed and features a fold-down tray for space savings when not in use. All media which can be fed from
the MPF can be used when the Banner Tray is attached.
High performance
•
Up to 25 ppm black or color
•
500 MHz RISC processor (non-network) or 600 MHz (network)
•
128MB RAM
•
Time to first page
–
Black: less than 13 seconds
–
Color: less than 15 seconds