Lenovo ThinkStation P910 Hardware Maintenance Manual Download Page 97

Page: 97 / 244

– Select the recovery medium you created earlier with the Windows tool as the startup device. Refer

to “Selecting a temporary startup device” on page 70. Then, follow the instructions on the screen
to choose the appropriate recovery solution.

Note:

To create a recovery medium, refer to “Good maintenance practices” on page 56.

• Use the recovery USB key provided by Lenovo to restore the entire storage drive to the factory-default

settings.

– If your computer comes with the recovery USB key, follow the instructions shipped with the USB key.

– If your computer does not come with the recovery USB key, contact the Lenovo Customer Support

Center to order a recovery USB key. Refer to “Calling for service” on page 216.

Chapter 7

Troubleshooting, diagnostics, and recovery

Summary of Contents for ThinkStation P910





















































































































































































































































Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands

Lenovo ThinkStation P910, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands