Lenovo ThinkStation P910 Hardware Maintenance Manual Download Page 185

Page: 185 / 244

8. Insert the corresponding end of the PCI card retainer into the gaps in the PCI card latch as shown. Pivot

the retainer downward to insert part

into the corresponding slot in the front fan assembly.

Figure 134. Installing the PCI card retainer

9. Pivot the tab

downward until it snaps into position.

Figure 135. Closing the card latch

10. If the new PCI card needs to be connected to another device, connect the cable of the device to the card.

11. Reinstall the direct cooling air baffle if you have removed it. See “Direct cooling air baffle” on page 105.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 213.

Chapter 9

Installing or replacing hardware

179

Summary of Contents for ThinkStation P910





















































































































































































































































Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands

Lenovo ThinkStation P910, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands