Lenovo ThinkStation P910 Hardware Maintenance Manual Download Page 118

Page: 118 / 244

2. Unlock the enclosure cover with the provided key as shown. Press the notch

to open the enclosure

cover.

Figure 24. Opening the front-access storage enclosure cover

3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the

front-access storage enclosure.

Figure 25. Removing the bracket from the front-access storage enclosure

4. To remove the 2.5-inch storage drive, do the following:

a. Flex both sides of the bracket to remove the 2.5-inch storage drive from the bracket.

Figure 26. Removing the 2.5-inch storage drive from the bracket

112

P910 Hardware Maintenance Manual

Summary of Contents for ThinkStation P910





















































































































































































































































Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands

Lenovo ThinkStation P910, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands