Lenovo ThinkStation P910 Hardware Maintenance Manual Download Page 116

Page: 116 / 244

1. Before removing an old 3.5-inch storage drive, safely eject the old storage drive from the operating

system first. For more information, see the Windows help system.

2. Unlock the enclosure cover with the provided key as shown. Press the notch

to open the enclosure

cover.

Figure 19. Opening the front-access storage enclosure cover

3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the

front-access storage enclosure.

Figure 20. Removing the bracket from the front-access storage enclosure

4. To remove the 3.5-inch storage drive, flex both sides of the bracket to remove the 3.5-inch storage

drive from the bracket.

Figure 21. Removing the 3.5-inch storage drive from the bracket

110

P910 Hardware Maintenance Manual

Summary of Contents for ThinkStation P910





















































































































































































































































Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands

Lenovo ThinkStation P910, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands