Lenovo ThinkStation P910 Hardware Maintenance Manual Download Page 136

Page: 136 / 244

4. Install the 3.5-inch storage drive into the flex bay storage enclosure. Then, install the four screws to

secure the drive to the flex bay storage enclosure.

Figure 59. Installing the 3.5-inch storage drive to the flex bay storage enclosure

5. Slide the flex bay storage enclosure into the optical drive bay. See “Device in an optical-drive bay” on

page 107.

6. Connect the signal cable and the power cable to the new storage drive.

Figure 60. Connecting the cables to the storage drive

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 213.

2.5-inch storage drive

To install or replace a 2.5-inch storage drive, do the following:

130

P910 Hardware Maintenance Manual

Summary of Contents for ThinkStation P910





















































































































































































































































Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands

Lenovo ThinkStation P910, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkStation P910

Reviews:

Related manuals for ThinkStation P910

Brands by name

Popular brands