Lenovo ThinkServer TS150 User Manual And Hardware Maintenance Manual Download Page 73

Page: 73 / 148

4. Press the release tab

and slide the drive out of the drive bay.

Figure 35. Removing the drive from the drive bay

5. Remove the four screws and then take the drive out of the Lenovo ThinkServer TS150 FDD to 2.5'' HDD

convertor kit (hereinafter called the 2.5-inch convertor kit).

Figure 36. Removing the drive from the 2.5-inch convertor kit

6. Install a new drive or install a metal shield to cover the drive bay.

7. If you are instructed to return the old drive, follow all packaging instructions and use any packaging

materials that are supplied to you for shipping.

Chapter 5

Replacing hardware

Summary of Contents for ThinkServer TS150





















































































































































Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands

Lenovo ThinkServer TS150, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands