Lenovo ThinkServer TS150 User Manual And Hardware Maintenance Manual Download Page 26

Page: 26 / 148

Front view of the server

The front view of the server varies by model. Depending on the model, your server might look slightly
different from the illustration in this topic.

Figure 2. Front view of the server

Optical drive (available on some models)

RDX tape drive (available on some models)

HDD status LED

Power status LED

Power button

USB 3.0 connectors (2)

Table 2. LED status

LED

Status

Description

Blinking green

Storage drives are active and data is
being transferred.

HDD status LED

Off

Storage drives are not in use.

Green

The system is powered on.

Power status LED

Off

The system is powered off.

Note:

The HDD status LED is functional only when the storage drives are connected to the SATA connectors

on the system board.

ThinkServer TS150 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer TS150





















































































































































Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands

Lenovo ThinkServer TS150, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands