Lenovo ThinkServer TS150, User Manual And Hardware Maintenance Manual

Page: 65 / 148

4. Press the release tab 1 and slide the tape drive out of the drive bay.
Figure 22. Removing the tape drive from the drive bay
5. Install a new tape drive or install a metal shield to cover the drive bay.
6. If you are instructed to return the old tape drive, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
Installing a tape drive
To install a tape drive, do the following:
1. Prepare your server. See “Preparing your server and removing the server cover” on page 41.
2. Remove the front bezel. See “Removing the front bezel” on page 42.
3. If there is a metal shield covers the drive bay, remove the metal shield. Save the metal shield in case
that you later remove the drive and need the metal shield to cover the drive bay.
4. If needed, remove the drive bay retainer from the server. Push the retainer downwards to unlock it and
then lift it out of the chassis.
Figure 23. Removing the retainer
Chapter 5
.
Replacing hardware
51